{"id":700,"date":"2026-06-23T00:47:17","date_gmt":"2026-06-23T00:47:17","guid":{"rendered":"https:\/\/www.gretopway.com\/?post_type=product&p=700"},"modified":"2026-06-23T00:56:15","modified_gmt":"2026-06-23T00:56:15","slug":"movable-all-in-one-ess-specification-for-inverter-battery-6kw16kwh","status":"publish","type":"product","link":"https:\/\/www.gretopway.com\/ar\/product\/movable-all-in-one-ess-specification-for-inverter-battery-6kw16kwh\/","title":{"rendered":"Movable All-In-One ESS Specification for Inverter & Battery 6KW+16KWH"},"content":{"rendered":"

Test Instrumentation & Device Characteristics<\/h3>\n

The accuracy of the voltage measuring instrument should not be lower than level 0.5, and the internal resistance should not be less than 10k \u03a9\/V; The accuracy of the current measuring instrument should not be lower than level 0.5; The accuracy of the instrument used for measuring time shall not be less than \u00b1 0.1%; The temperature measuring instrument should not be lower than \u00b1 1 \u2103; The voltage output and detection accuracy of the battery charge and discharge tester shall not be less than \u00b1 0.5%; The current output and detection accuracy shall not be less than \u00b1 0.1%;<\/p>\n

Safety Performance Requirements<\/h3>\n\n\n\n\n\n\n\n\n
Item<\/th>\nTest Method<\/th>\nRequire<\/th>\n<\/tr>\n
Short Circuit<\/td>\nAfter being fully charged using the standard charging method at 25 \u00b0C, short-circuit the positive and negative terminals of the battery pack’s discharge port with wires (wire resistance 80 \u00b1 20 m\u03a9) for 1 hour.<\/td>\nThe battery pack should not leak, ignite, or explode.<\/td>\n<\/tr>\n
OverCharge<\/td>\nAfter charging with the standard charging method at 25 \u00b0C, set the constant current source to 1.25 times the nominal voltage and 0.11 (A).<\/td>\n<\/tr>\n
Discharge<\/td>\nDischarge the battery pack to the termination voltage or battery pack protection, and then continue discharging for 5 hours at 0.11 (A).<\/td>\n<\/tr>\n
Constant Damp Heat Test<\/td>\nAfter charging using the standard charging method at 25 \u00b0C, place it in a constant temperature and humidity chamber at (40 \u00b1 2) \u00b0C and relative humidity of 90-95% for 48 hours; After 7 hours of storage, visually inspect.<\/td>\nVisually inspect the appearance and ensure that there is no leakage, smoke, fire, or explosion.<\/td>\n<\/tr>\n
High and low temperature impact<\/td>\nAfter charging using the standard charging method at 25 \u00b0C, place the battery pack in an environment with a temperature of 75 \u00b0C \u00b1 2 \u00b0C for 6 hours, then move it to an environment with a temperature of -40 \u00b0C for 6 hours. The time interval between moving from the highest temperature to the lowest temperature should not exceed 3 minutes. Repeat the above steps, after 10 cycles, remove and let it sit for 24 hours, and visually inspect.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Component Diagram<\/h3>\n

\"Movable<\/p>\n

Dimensions<\/h3>\n

\"Movable<\/p>\n

Parameters<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Inverter Parameters<\/b><\/td>\n<\/tr>\n
<\/td>\nPower<\/td>\n6KVA\/6KW<\/td>\n<\/tr>\n
<\/td>\nMaximum photovoltaic input power<\/td>\n9KW<\/td>\n<\/tr>\n
<\/td>\nTwo AC outputs<\/td>\nYes<\/td>\n<\/tr>\n
<\/td>\nMaximum one-way AC output power<\/td>\n6KVA\/6KW<\/td>\n<\/tr>\n
<\/td>\nMaximum two-channel AC output power<\/td>\n6KVA\/6KW<\/td>\n<\/tr>\n
<\/td>\nMaximum AC total output power<\/td>\n6KVA\/6KW<\/td>\n<\/tr>\n
<\/td>\nParallel machine function<\/td>\nNO<\/td>\n<\/tr>\n
<\/td>\nLithium-ion communication<\/td>\nRS232\/RS485\/Dry Contact<\/td>\n<\/tr>\n
<\/td>\nLithium battery activation<\/td>\nYes (photovoltaic or mains)<\/td>\n<\/tr>\n
Input<\/b><\/td>\n<\/tr>\n
<\/td>\nRated voltage<\/td>\n230VAC<\/td>\n<\/tr>\n
<\/td>\nVoltage range<\/td>\n170-280VAC (computer application); 90-280VAC (household appliances)<\/td>\n<\/tr>\n
<\/td>\nFrequency<\/td>\n50 \/ 60 Hz (automatic detection)<\/td>\n<\/tr>\n
Output<\/b><\/td>\n<\/tr>\n
<\/td>\nRated voltage<\/td>\n220\/240VAC\u00b15%<\/td>\n<\/tr>\n
<\/td>\nInstantaneous power<\/td>\n9000VA<\/td>\n<\/tr>\n
<\/td>\nFrequency<\/td>\n50\/60 Hz<\/td>\n<\/tr>\n
<\/td>\nOutput waveform<\/td>\nPure sine wave<\/td>\n<\/tr>\n
<\/td>\nSwitching time<\/td>\n10ms (computer application); 20ms (household appliances)<\/td>\n<\/tr>\n
<\/td>\nPeak efficiency (PV to INV)<\/td>\n96%<\/td>\n<\/tr>\n
<\/td>\nPeak power (Battery to INV)<\/td>\n93%<\/td>\n<\/tr>\n
<\/td>\nOverpower protection<\/td>\n5s@>=140% load; 10s@100%~140% load<\/td>\n<\/tr>\n
<\/td>\nPeak coefficient<\/td>\n3:1<\/td>\n<\/tr>\n
<\/td>\nPower factor<\/td>\n0.6~1 (capacitive or inductive)<\/td>\n<\/tr>\n
<\/td>\nGrid connection mode<\/td>\nNot support<\/td>\n<\/tr>\n
PV Charging & AC Charging<\/b><\/td>\n<\/tr>\n
<\/td>\nCharge mode<\/td>\nMPPT<\/td>\n<\/tr>\n
<\/td>\nMaximum photovoltaic input power<\/td>\n9000W<\/td>\n<\/tr>\n
<\/td>\nMaximum photovoltaic open circuit voltage<\/td>\n500VDC<\/td>\n<\/tr>\n
<\/td>\nMPPT voltage range<\/td>\n60VDC~450VDC<\/td>\n<\/tr>\n
<\/td>\nMaximum photovoltaic input current<\/td>\n27A<\/td>\n<\/tr>\n
<\/td>\nMaximum photovoltaic charging current<\/td>\n120A<\/td>\n<\/tr>\n
<\/td>\nMaximum mains charging current<\/td>\n120A<\/td>\n<\/tr>\n
<\/td>\nMaximum charging current<\/td>\n120A<\/td>\n<\/tr>\n
Battery Parameters<\/b><\/td>\n<\/tr>\n
<\/td>\nNominal Capacity<\/td>\n16kW.h (0.3C charging, 1C discharging, 25\u2103)<\/td>\n<\/tr>\n
<\/td>\nRated Voltage<\/td>\n51.2V (16S)<\/td>\n<\/tr>\n
<\/td>\nDischarge Cut-off Voltage<\/td>\n44V<\/td>\n<\/tr>\n
<\/td>\nCharging Cut-off Voltage<\/td>\n56.4V<\/td>\n<\/tr>\n
<\/td>\nFloat charging voltage<\/td>\n56V<\/td>\n<\/tr>\n
<\/td>\nContinuous charging maximum current<\/td>\n160A (Can Set)<\/td>\n<\/tr>\n
<\/td>\nMaximum current for continuous discharge<\/td>\n150A<\/td>\n<\/tr>\n
<\/td>\nBattery Energy<\/td>\n16000Wh<\/td>\n<\/tr>\n
<\/td>\nRated Output Power<\/td>\n6000W<\/td>\n<\/tr>\n
<\/td>\nCommunication Interface<\/td>\nRS232\/RS485\/Dry Contact<\/td>\n<\/tr>\n
<\/td>\nDischarge working temperature<\/td>\n-15\u2103~50\u2103<\/td>\n<\/tr>\n
<\/td>\nCharging working temperature<\/td>\n0\u2103~50\u2103<\/td>\n<\/tr>\n
General<\/b><\/td>\n<\/tr>\n
<\/td>\nRelative Humidity<\/td>\n5~90%<\/td>\n<\/tr>\n
<\/td>\nAltitude<\/td>\n\u22644000m<\/td>\n<\/tr>\n
<\/td>\nProtection Grade<\/td>\nIP21<\/td>\n<\/tr>\n
<\/td>\nStorage Time<\/td>\nKeep charging at least once every 3 months<\/td>\n<\/tr>\n
<\/td>\nNumber of cycles<\/td>\n6000 times, DOD\u226590%; 10000 times, DOD\u226580%; 75% DOD 25\u00b0C<\/td>\n<\/tr>\n
Main Parameters For BMS<\/b><\/td>\n<\/tr>\n
Overcharge Protection<\/i><\/td>\n<\/tr>\n
<\/td>\nOvercharge detection voltage<\/td>\nMonomer 3.65 \u00b1 0.05V<\/td>\n<\/tr>\n
<\/td>\nOvercharge protection delay<\/td>\n0.5S<\/td>\n<\/tr>\n
Over Discharge Protection<\/i><\/td>\n<\/tr>\n
<\/td>\nOverdischarge detection voltage<\/td>\nMonomer 2.7 \u00b1 0.05V<\/td>\n<\/tr>\n
<\/td>\nOverdischarge detection delay<\/td>\n0.5S<\/td>\n<\/tr>\n
Overcurrent Protection<\/i><\/td>\n<\/tr>\n
<\/td>\nGreater than rated current<\/td>\n1.1%<\/td>\n<\/tr>\n
<\/td>\nOvercurrent Recovery<\/td>\n\/ (disconnect Load)<\/td>\n<\/tr>\n
Self Consumption Power<\/i><\/td>\n<\/tr>\n
<\/td>\nWorking Current<\/td>\n\u226410mA<\/td>\n<\/tr>\n
<\/td>\nSleep Current<\/td>\n\u226450\u03bcA<\/td>\n<\/tr>\n
Physical Property<\/b><\/td>\n<\/tr>\n
<\/td>\nProduct Size, length x width x height (mm)<\/td>\n1050*460*240<\/td>\n<\/tr>\n
<\/td>\nPackage Size, length x width x height (mm)<\/td>\n1085*520*300<\/td>\n<\/tr>\n
<\/td>\nNet Weight (Kgs)<\/td>\n122<\/td>\n<\/tr>\n
<\/td>\nGross Weight (Kgs)<\/td>\n124<\/td>\n<\/tr>\n
<\/td>\nLCD<\/td>\nYes<\/td>\n<\/tr>\n
Application Environment<\/b><\/td>\n<\/tr>\n
<\/td>\nOperating temperature range<\/td>\n-10\u00b0C to 55\u00b0C<\/td>\n<\/tr>\n
<\/td>\nStorage temperature range<\/td>\n-15\u00b0C~60\u00b0C<\/td>\n<\/tr>\n
<\/td>\nHumidity<\/td>\n5% to 95% relative humidity (no frost)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Product Appearance Requirements<\/h3>\n

The edge sealing tape of the battery pack must be neatly applied and free of bubbles;
\nThe position of the anti vibration sponge attached to the outside of the battery pack is regular and neat;
\nClean appearance of battery pack;<\/p>\n

\n

Packing, Shipping & Storage Requirements<\/h3>\n

Product outer packaging box packaging requirements:
\ncomply with the requirements of the product packaging schematic diagram.
\nProduct transportation requirements:<\/strong><\/p>\n

    \n
  1. During transportation, batteries should be protected from severe vibration, impact, or compression, as well as exposure to sunlight and rain. They can be transported by vehicles such as cars, trains, ships, and airplanes;<\/li>\n
  2. During the loading and unloading process, batteries should be placed gently to prevent falling, rolling, and heavy pressure.<\/li>\n<\/ol>\n

    Product storage requirements:<\/strong><\/p>\n

      \n
    1. The battery should be stored indoors in a clean, dry, and ventilated environment with an ambient temperature of -10 \u2103 to 35 \u2103 and a relative humidity of no more than 85%;<\/li>\n
    2. The battery should be kept away from corrosive substances and kept away from sources of fire and heat;<\/li>\n
    3. Battery storage SOC: 40% to 60%.<\/li>\n<\/ol>","protected":false},"excerpt":{"rendered":"

      Scope<\/strong>
      \nThis product is suitable for 51.2V product applications and can be used in conjunction with photovoltaics and inverters to supply power to household televisions, air conditioners, lighting fixtures, etc. This product has voltage, current, and temperature protection functions.<\/p>\n

      Product Specification<\/strong>
      \nTesting Condition
      \nUnless otherwise specified in the testing project, all tests in this specification shall be conducted under the following conditions:<\/p>\n

        \n
      • Environmental temperature: 25\u00b12\u00a0\u2218C<\/span>;<\/li>\n
      • Relative humidity: 65%\u00b120%<\/span><\/li>\n<\/ul>","protected":false},"featured_media":701,"template":"","meta":[],"product_brand":[],"product_cat":[41],"product_tag":[],"class_list":["post-700","product","type-product","status-publish","has-post-thumbnail","product_cat-all-in-one-solar-generator","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/product\/700","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/media\/701"}],"wp:attachment":[{"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/media?parent=700"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/product_brand?post=700"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/product_cat?post=700"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.gretopway.com\/ar\/wp-json\/wp\/v2\/product_tag?post=700"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}